T- Series Ligtweight Billet Aluminum Fastener Kits
Available for all 2010 to 2013 YZ450F T-Series Billet aluminum fastener kits. New lightweight low profile design eliminates the problem of catching the radiator shroud and fuel tank fasteners on your pants and boots. Manufactured from T7075 high tensile aluminum*. All bolts are made in the USA to exact original specs including locating-spacing shoulders so they properly locate the plastic without crushing it. The drilled flange head acts as an excellent locking mechanism as it bites into the plastic for a secure installation.
MOTO STUFF is the exclusive source for IRP billet products in North America!
*IRP T7075 kits are 1/3 the weight of the stock steel bolts and half the weight of Titanium bolts!
2010 to 2013YZF 250models
Available in Natural Silver or anodized RED or BLUE.
2010 to 2013 YZF 250 & YZF 450IRP T-10 Lightweight Billet Aluminum 10 piece Fastener kit kit includes :
2 seat bolts (5mm Allen max torque 6-Nm or 50 inch /lbs) 6 shroud bolts 12mm long (5mm Allen max torque 5-Nm or 40 inch /lbs) 2 side plate 16mm long (5mm Allen max torque 5-Nm or 40 inch /lbs)
*Please note that the rear most fastener on the 2010-2013 YZF 450 lower radiator shrouds are not included as they are the main fuel tank mounting bolts and aluminum fasteners in this location would not be strong enough.
MOTO STUFF recommends that you use a T handle Allen wrench to snugly tighten these aluminum fasteners.
If you must use a torque wrench, make sure it is a high quality 1/4" drive. DON NOT USE a 3/8" or 1/2" torque wrench!
The drilled flange head acts as an excellent locking mechanism as it bites into the plastic for a secure installation.